Call us at 718-887-1986
Contact Us 718-887-1986
support@ebuyusa.com

Found a lower price? Call eBuyUSA at 718-887-1986

ADD TO CART FOR A LOWER PRICE

Panasonic PT-CW240U Ultra-Short Throw 1-Chip DLP Projector

This Product is the original item sold in any major retail store or listed on the manufacturer website.

Item: #PTCW240U

eBuyUSA lifetime tech support included
Free fully insured delivery included
Condition: BRAND NEW

Your Price Today

$987.93

Panasonic PT-CW240U Ultra-Short Throw 1-Chip DLP Projector $987.93

Quantity Add To Cart

With 2600 lumens and an 8000:1 contrast ratio, the Panasonic PT-CW240U Ultra-Short Throw 1-Chip DLP Projector possesses the image power to project vivid, pictures in a variety of lighting situations. The ultra-short throw projector allows you to project images onto a large 80" screen with a short projection distance of 2', and is newly equipped with an interactive function.

Ultra-Short Throw
The projector allows image projection onto a wide 80" screen with a short projection distance of 2'. This ultra-short throw projector can be wall-mounted with a wall mount bracket (ET-PKC200W / sold separately). Also, it does not allow the presenter's shadow or glare of the projection light to fall on the screen.

High Brightness
The high brightness of 2600 lumen ensures bright and easy-to-see image projection. It is highly effective for lessons and presentations in classrooms and meeting rooms. 1 Please Note: During RGB signal input, lamp power is normal. close

3D Ready
The projector delivers 3D images with a reproduction apparatus and you can enjoy it with the 3D glasses. The combination of this system with the short-throw function enables space-saving 3D projection, helping you create enhanced and attractive presentations. Note: To view 3D images, DLP Link active-shutter 3D glasses are required (sold separately). In the active shutter system, the right / left liquid crystal shutter is opened and closed alternately according to projected images. The active-shutter 3D glasses with refresh rate of 96 to 144 Hz are recommended. 3D images of 60 Hz can also be viewed by a 120 Hz compatible device.

3D System Support
The HDMI input terminal supports 3D. You can connect a 3D Blu-ray player to the projector to project Blu-ray 3D images. As synchronized signals are contained between the frames (images) for the left and right eyes, you can build a 3D system without the need for the optional emitter. It also supports frame packing, side-by-side, top-and-bottom, and frame sequential method. 2 Please Note: Configuration: 3D Contents + Reproduction apparatus + 3D Glasses (DLP Link system) close

DLP System
In the DLP system, the image quality does not degrade with time due to long life of the device. You can use the projector for various systems over a long period without the worry of quality loss. 3 Please Note: 24 hours continuous operation is not available. close

10W High-Output Speaker
The volume level of the 10W, high-output speaker is enough for meeting rooms and classrooms or even multimedia presentations. You do not need to use an external speaker.

Long Lamp Replacement Cycle
A lamp replacement cycle of 5000 hours makes maintenance easy, while minimizing environmental impact. 4 Please Note: The maximum value when the lamp power is set to Eco mode & turned on is for 2 hours or when off is for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement cycle is 3,500 hours. The usage environment affects the duration of the lamp. close

0.5W Standby Power Consumption
The standby power consumption is as low as 0.5W, reducing maintenance and effects on the environment. 5 Please Note: When LAN (Standby) / VGA Out (Standby) / In Standby mode (Audio) are all set to off. close

Extensive Interfaces with an HDMI Input Terminal
Extensive interfaces, including 2 sets of computer (RGB) input terminals, 1 set of computer (RGB) output terminals, and an HDMI input terminal, allow a wide range of system configurations.

Audio Output in Standby Mode
Audio output can be received from the audio output terminal in Standby Mode. This function is useful when the audio output terminal is connected to the external audio system via the projector. 6 Please Note: Select the menu for setting.In addition to the speaker, an audio amplifier is necessary (sold separately). close

Crestron RoomView Compatible
The wired LAN terminals support Crestron's application software, Crestron RoomView, which can control various system devices by using a personal computer connected to the network.

Wall Color Setting
The projector has an Image Mode convenient for performing optimal correction when projecting onto a blackboard and wall, especially in rooms with no screens.

Easy to Replace Lamp
You can replace the lamp from the side of the projector. When replacing the lamp, there is no need to detach the projector from the ceiling bracket or the wall mount bracket.

Security Bar
The projector is equipped with a security bar for preventing theft.

Wireless Remote Control
The projector comes with a wireless remote control that can be used for more than one projector. A maximum of 7 IDs (ALL, ID1-ID6) can be set up, allowing individual remote control of each projector.

Speakers
2.7 x 1.1" (7 x 3 cm) oval shape