Call us at 718-887-1986
Contact Us 718-887-1986
support@ebuyusa.com

Found a lower price? Call eBuyUSA at 718-887-1986

ADD TO CART FOR A LOWER PRICE

Panasonic PT-CX301RU Interactive Ultra-Short Throw DLP Projector

This Product is the original item sold in any major retail store or listed on the manufacturer website.

Item: #PTCX301RU

eBuyUSA lifetime tech support included
Free fully insured delivery included
Condition: BRAND NEW

Your Price Today

$1,553.50

Panasonic PT-CX301RU Interactive Ultra-Short Throw DLP Projector $1,553.50

Quantity Add To Cart

The Panasonic PT-CX301RU Interactive Ultra-Short Throw DLP Projector is flexible and powerful enough to thrive in a variety of working conditions. With a brightness of 3100 lumens and a contrast ratio of 8000:1, the PT-CX301RU uses a single lamp and efficient focusing reflector to minimize consumption to only 280W. It has an XGA resolution of 1280 x 800 and an interactive function, which allows you to write or draw figures on the projected image with the interactive pen/pointer. In addition, two users can write simultaneously, to make classes and presentations more effective.

3100 Lumens
The brightness of 3100 lumens and a contrast ratio of 8000:1, ensuring bright and easy-to-see image projection, is highly effective for lessons and presentations in classrooms and meeting rooms

DLP System
In the DLP system, the image quality does not degrade with time due to long life of the device. You can use the projector for various systems over a long period without worry of quality loss. Twenty-four-hour continuous operation is not available

3D Projection
The projector delivers 3D images. You can enjoy powerful 3D images with a reproduction apparatus and the 3D glasses. The combination of this system with the short-throw function enables space-saving 3D projection

Interactive Function
The interactive function allows you to write on a projected image. You can write or draw figures on the projected image with the interactive pen/pointer. The scanning camera frame rate of the projector, which is twice as high as that of existing products, ensures smooth writing. In addition, two users can write simultaneously, to make classes and presentations more effective. It is easy to store the words and figures in a computer for information sharing

Ultra-Short Throw
Projection onto a wide 80" screen with a short projection distance of 0.6 m. The ultra-short throw projector can be wall-mounted with an optional wall mount bracket (ET-PKC200W). There is no need to worry about the presenter's shadow on the screen and glare of the projection light

HDMI Input Terminal Supports 3D
The HDMI input terminal supports 3D. Connect a 3D Blu-ray player to the projector to project Blu-ray 3D images

DLP Link
As synchronized signals are contained between the frames (images) for the left and right eyes, you can build a 3D system without the need for the optional emitter

3D-Compatible Signal
Supports frame packing, side-by-side, top-and-bottom, and frame sequential method

Wireless Remote Control is Convenient When Using More Than One Projector
A maximum of seven IDs (ALL, ID1-ID6) can be set up, allowing individual remote control of each projector

0.5W Standby Power Consumption
The standby power consumptions is as low as 0.5W, reducing running cost and effects on the environment

Wall Color Setting Convenient for a Classroom with No Screen
The projector has an image mode performing optimal correction when projecting onto a blackboard and wall

Easy to Replace the Lamp
Replace the lamp from the side of the projector. When replacing the lamp, there is no need to detach the projector from the ceiling bracket or the wall mount bracket

Extensive Interfaces with an HDMI Input Terminal
Extensive interfaces, including two sets of computer (RGB) input terminals, one set of computer (RGB) output terminals and an HDMI input terminal, allows a wide range of system configurations

Ensuring a Long Lamp Replacement Cycle
The lamp replacement cycle for the projector is 4000 hours. Such long replacement cycles reduce the hassle and the cost of maintenance, while minimizing environmental impact. This is the maximum value when the lamp power is set to Eco Mode where the lamp is turned on for two hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement cycle is 3000 hours. The usage environment affects the duration of the lamp

Security Bar
The projector is equipped with the security bar for preventing theft

10W Output Speaker
The volume level of the 10W speaker is enough for meeting rooms and classrooms; you do not need to use an external speaker. You can make multi-media presentations

Audio Can Be Output in Standby Mode
Audio can be output from the audio output terminal in Standby Mode. This function is useful when the audio output terminal is connected to the external audio system via the projector. In addition to the speaker, an audio amplifier is necessary

Full Screen Mode
Write on the full screen. The color and line width of the two pens are same

Half Screen Mode
The drawing screen is divided into two sections. Individually select color and line width for each screen

Dual Pen Support
Select the dual pen mode (Half screen mode/Full screen mode). Two users can write simultaneously, making your classes and presentations more efficient

Auto Calibration
The auto calibration helps to reduce setting time. Manual calibration is also available by touching four points with the interactive pen/pointer

Crestron Connected Compatible
The wired LAN terminal supports Crestron's application software, Crestron Connected, which can control various system devices by using a personal computer connected to the network

Eco-Friendly
No halogenated flame retardants are used in the cabinet Lead-free glass is used for the lens Coating-free cabinet for easy recycling Low standby power of 0.5W Switchable lamp mode

Remote Control
Power Supply: 3 V DC (Lithium coin cell battery x 1) Range: Approximately 26.3' (8 m) when operated from directly in front of the signal receptor Dimensions: 1.6 x 3.4 x 0.3" (41 x 87 x 7 mm) Weight Including Lithium Coin Cell Battery: 0.8 oz (23 g)

Additional Features and Specs
Cabinet Materials: Molded plastic (PC) Speaker Size: 2.75 x 1.2" (7 x 3 cm) Oval-shaped x 1